QH5 Series
Portable Leeb Metal Hardness Testers
QH5
Outstanding features
Measure with the Leeb or rebound method
Measures in the most popular units
Accepts all impact device types 1
Generate user materials
Sound and visual alarms for maximum and minimum
CalTag: Impact devices with calibration
Memory for 32000 readings
USB for data transfer
Real time histogram graphics
Real time complete statistics
Meets international standards
5 years limited warranty on the electronic unit
1. Depending on model. See the Models section.
Impact devices with CalTag
We offer impact devices that are application specific and all include CalTag which is integrated calibration to ensure precise and reliable measurements.
Impact devices with CalTag
We offer impact devices that are application specific and all include CalTag which is integrated calibration to ensure precise and reliable measurements.
Type G impact device
A greater impact energy allows measurements on rough surfaces with little preparation. Recommended for large, founded and forged parts.
Type DL impact device
Features a 50mm long tip and 4mm diameter making it ideal to measure in hard to reach places such as grooves and gears.
Type D impact device
Impact device with a short body, ideal for measurements in reduced spaces.
Type D impact device comes standard with the QH5 D and QH5 M models.
Type E impact device
Uses a synthetic diamond ball allowing high hardness measurements (up to 1200 HV). This is the best option to measure hardened steel or parts with similar treatments.
Type C impact device
A low impact energy that also produces a smaller indentation makes this impact device ideal for superficial heat treatment and small part measurements.
Type DC impact device
Type D impact device with a short body, ideal for measurements in reduced spaces.
Type D
impact device
Impact device with a short body, ideal for measurements in reduced spaces.
Type D impact device comes standard with the QH7 L and QH7 C models.
Impact energy: 11Nmm
Length: 147mm / 5.78in
Weight: 75g / 2.64oz
Type DC
impact device
Type D impact device with a short body that is ideal for measurements in reduced spaces.
Impact energy: 11Nmm
Length: 86mm / 3.38in
Weight: 50g / 1.76oz
Type DL
impact device
Features a 50mm long tip and 4mm diameter making it ideal to measure in hard to reach places such as grooves and gears.
Impact energy: 11Nmm
Length: 20 2mm / 7.95in
Weight: 100g / 3.52oz
Type C
impact device
A low impact energy that also produces a smaller indentation makes this impact device ideal for superficial heat treatment and small part measurements.
Impact energy: 3Nmm
Length: 141mm / 5.55in
Weight: 75g / 2.64oz
Type G
impact device
A greater impact energy allows measurements on rough surfaces with little preparation. Recommended for large, founded and forged parts.
Impact energy: 90Nmm
Length: 254mm / 10in
Weight: 250g / 8.81oz
Type E
impact device
Uses a synthetic diamond ball allowing high hardness measurements (up to 1200 HV). This is the best option to measure hardened steel or parts with similar treatments.
Impact energy: 11Nmm
Length: 155mm / 6.10in
Weight: 80g / 2.82oz
Ready to use
Delivered in a high impact carrying case, inside you will find:
- QH5 electronic unit
- Certificate of conformity
- Impact device 5
- USB cable to connect to a PC
- Coupling paste for parts
- Reference test block
- Pendrive with dmq DataCenter software
- Printed user manual
5. Depends on the model
What's inside the QH5 L & QH5 M
QH5 electronic unit - Front and Back
QH5 electronic unit - Power supply: AA x2
QH5 electronic unit - Connectors detail
QH5 electronic unit - Tilt Feet
Hardness measurements with the LEEB method - QH5
You can find more videos in our YouTube channel.
Go YoutubeAccessories and Consumables
QHS111
Type D impact device
General use impact device that offers the widest measuring ranges in all hardness units and standard metals
Impact energy: 11Nmm
Length: 147mm / 5.78in
Weight: 75g / 2.64oz
QHS211
Type DC impact device
Type D impact device with a short body that is ideal for measurements in reduced spaces.
Impact energy: 11Nmm
Length: 86mm / 3.38in
Weight: 50g / 1.76oz
Type DL impact device
QHS311
Features a 50mm long tip and 4mm diameter making it ideal to measure in hard to reach places such as grooves and gears.
Impact energy: 11Nmm
Length: 202mm / 7.95in
Weight: 100g / 3.52oz
QHS511
Type C impact device
A low impact energy that also produces a smaller indentation makes this impact device ideal for superficial heat treatment and small part measurements.
Impact energy: 3Nmm
Length: 141mm / 5.55in
Weight: 75g / 2.64oz
QHS611
Type G impact device
A greater impact energy allows measurements on rough surfaces with little preparation. Recommended for large, founded and forged parts.
Impact energy: 90Nmm
Length: 254mm / 10in
Weight: 250g / 8.81oz
QHS711
Type E impact device
Uses a synthetic diamond ball allowing high hardness measurements (up to 1200 HV). This is the best option to measure hardened steel or parts with similar treatments.
Impact energy: 11Nmm
Length: 155mm / 6.10in
Weight: 80g / 2.82oz
QHX102
Impact Body
Consult for impact device model.
QHA012
Set of 12 support rings to measure concave and convex surfaces
Compatible with type D, DC, C and E impact devices.
QHG005
Coupling paste 50cc / 1,76oz
Coupling paste for use with lightweight parts.
HLD reference test block
Type Leeb reference test block
Diameter: 90mm
Height: 56mm
Weight: 2.9kg
Hardness: 740 a 790HLD ±6HLD
- QHR101: For D, DC impact devices
- QHR102: For DL impact device
- QHR103: For C impact device
HLG reference test block
Type Leeb reference test block
Diameter: 150mm
Height: 90mm
Weight: 5.8kg
Hardness: 460 a 550HLG ±12HLG
HB, HRB, HRC and HV reference test blocks
- QHR201: Rockwell C (HRC) reference test block
- QHR301: Rockwell B (HRB) reference test block
- QHR401: Brinell (HB) reference test block
- QHR501: Vickers (HV) reference test block
Inquire.
YAMAMOTO brand test blocks
- YHR201: Rockwell C test blocks (HRC)
- YHR301: Rockwell B test blocks (HRB)
- YHR401: Brinell test blocks (HB)
- YHR501: Vickers HV10 test blocks (HV)
Inquire.
QHC101
Cable with connector for all dmq impact devices
Compatible with all dmq impact devices and instruments.
QAC001
Cable to connect a thermal printer to dmq instruments
Adapting cable with mini USB to mini USB connectors.
QAI001
Thermal printer for dmq instruments 6
Speed: 90mm/s
Resolution: 203dpi
Weight: 134g
Dimensions: 105 x 75 x 45mm
6. Does not include connecting cable
QHP001
Silicone protective cover
Color: Red
Certificates and International Standards
Included certificate
Certificate of Conformity
This certificate accompanies all DMQ equipment, they are made based on secondary reference test blocks, procedures and internal DMQ standards.
- QHF310: Certificate of Conformity for QH electronic unit with LEEB method on HLD test block
Optional certificates
Optionally, we offer Calibration certificates and Certificates with traceability for reference test blocks:
Calibration Certificate
Certificate issued by an external laboratory accredited by INTI-SAC, expressing the results of the calibration of the instruments or reference test blocks according to ISO/IEC 17025.
Check validity of the certifying organization in your region.
- QHF120: INTI-SAC Calibration Certificate under ISO/IEC 17025 IRAM 301 standard for HLD reference test block in HRC-HB or HV scale
Certificate with Traceability
Additional certificate based on instruments or reference test blocks certified by INTI-SAC laboratory, a copy of the traceability certificates is attached to the traceability certificate.
Check validity of the certifying organization in your region.
- QHF220: Certificate with INTI-SAC Traceability for HLD reference test block on HRC scale
International Standards
CE Marking
ASTM A956
Models: All
I am Quokke, the 
mascot.
Choose us and be as happy as I am!
See products
QH5 Series
Portable Leeb Metal Hardness Testers
Contact Us
Request Quotation